Thu. Dec 5th, 2024

Linksys Velop has changed the whole networking game. Whether you use it for your home network or for your office space, it provides wider and reliable coverage. But like any other technical gadgets it can also suffer from technical glitches and problems. One such common problem is the Linksys Velop Node Blinking Red or Linksys Router Red Light issue. If you are also facing the red light issue with your Velop and are looking for its troubleshooting methods then continue reading.

Common Causes For Linksys Router Red Light Issue

First you need to understand different LED behaviors of your Linksys router. If the router is showcasing a solid red light then it means there is no internet connection. Whereas a blinking red light depicts an improper connection between the Linksys router and the modem. 

Further, the other possible reasons for Linksys Router Red Light issue can be:

  • Pending firmware updates
  • Hardware Malfunction 
  • Loose Wired Connections
  • Wrong Setup Process

Now, as you are familiar with the causes for the issue, let’s jump on to the troubleshooting methods.

Providing Solutions For The Linksys Router Red Light Issue

The Linksys Router Red Light Issue is not a major or hard to solve problem. Rather it is a minor glitch that can be resolved easily through the below mentioned various methods:

  • Inspect Physical Connections 

Firstly, check the wires that are connecting the modem and the router together. This wire shouldn’t have any bruises or cuts on it and should function properly. Next, check the power supply. Both your router and the modem should be powered on. Further both the devices should have an uncut and constant supply of electricity.

  • Restart Your Linksys Router

Sometimes just a simple restart refreshes the whole connection. A reboot can instantly resolve the Linksys Router Red Light issue. To restart the Linksys router, simply disconnect the power cable from the power outlet. Then, wait for 30 seconds to a minute and lastly, plug in the power cable back to the power source.

  • Confirm Internet Availability 

Check if the modem is having an active internet plan or not. If it has but still the modem is not online then immediately contact your ISP (Internet Service Provider). An active internet is crucial for the router to work properly.

  • Update Firmware 

To update the router’s firmware you can either use the Linksys app or web UI. Updating through the app is extremely easy. You just need to download and install the Linksys app on your device and follow the directions. To update through Web UI, you need to follow these steps:

  1. On the connected device open any updated internet browser.
  2. Go to the address bar, enter the default web or IP address of your router and tap Enter.
  3. To access the dashboard, fill up the details like username and password. Tap on Log In.
  4. Go to the administrative section and check for the pending updates. 
  • Reset The Linksys Router

In case none of the above troubleshooting methods for resolving Linksys Router Red Light issue paves your way, then head towards the factory reset. To reset your Linksys router, first find out the reset button and grab a paperclip or a hairpin. Now with the help of it press and hold the reset button for about 10 to 12 seconds. Release it and redo the setup process.

Resolving Linksys Velop Node Blinking Red Issue

To resolve this issue first you need to find out whether the main Velop Node which is connected to the modem is blinking red or the additional nodes are blinking red. In the first case the common cause is internet connection. Whereas in the second scenario the reason can be incorrect mesh connection. Do not worry as here is the complete solution set for you.

✓ Check Wired Connections And Electrical Supply

Firstly, to resolve the Linksys Velop Node Blinking Red issue, you need to make sure that the power supply is appropriate and constant. Further, recheck all the wires. Start by checking the Ethernet cable connecting the main velop system and the modem. Next check the connection between the main velop mode and additional nodes. 

✓ Follow Correct Configuration Process

Here is the detailed and step-by-step guidance for setting up the Linksys Velop.

  • Firstly, connect the modem to the main Velop system. Use a properly functioning Ethernet cable for the same. 
  • Next, power on the Velop system with the provided power adapter. Also, make sure the modem is powered on and working optimally.
  • Move to the next step only when the Velop system depicts a solid purple color. 
  • Further, pick up your smartphone and connect it to the wifi network of the Velop. Find out the default SSID (username) from underneath your Velop. 
  • On the connected device open Google Play Store or an App Store. Download and install the latest version of the Linksys app. 
  • Open the app on your device, follow the instructions to create or login into your account. 
  • Lastly, follow the app instructions to correctly setup the Velop Nodes. 

 

✓ Ensure Proper Placement 

Further, the incorrect placement of the velop nodes is the major and the common reason for the issue Of Linksys Velop Node Blinking Red. So place the main Velop unit near to your existing modem. Further, make sure there are no physical barriers like concrete or glass walls between the router and the modem. Additionally, avoid placing the Velop system near to the electronic and metal objects. Objects like fish tanks, cordless phones, microwave, refrigerators, wireless cameras and much more. 

Next, place the additional nodes within the range of the main velop unit. If the nodes are placed too far then the blinking red light issue will persist. So overall, placement is crucial to resolve the blinking red light issue.

✓ Restart Or Reset

Another troubleshooting method for resolving the Linksys Velop Node Blinking Red issue is to restart the router. If the kick of restart doesn’t solve the problem then take a turn towards the last solution which is reset. Remember that resetting the Velop system will revert it back to its default settings. All the data and settings will be erased. So be thoughtful before you pick the reset method. In case if the reset also doesn’t solve the issue then the last option is to take the help of experts. So connect to the experts and seek professional guidance.

Related Post

Leave a Reply